Hook-Up Procedures for Tankers, Totes & Drums for AcryShield Roof Coatings and LiquiSeal Asphalt Emulsion

TANKERS:

Need Help? Contact a Roofing  Professional  Zero Obligation
Container Volume 2,000 - 6,000 gallons
Available for Products    AcryShield and LiquiSeal

A typical pump feed line should be a 2” - 4” hose. Each end of the hose should have female cam-lock fittings/connectors on both ends. Tankers will have male cam-lock fittings/connectors. Normally the cam-lock fittings/connectors on a tanker or tote will be 4”. The contractor should have an adapter available if they are running a 2” feeder line in lieu of a 4” line. 

275-GALLON TOTE:

Container Type Poly-tote tank with a galvanized steel cage
Container Volume   275 gallons
Dimensions (w x d x h) 40" x 48" x 46"
Fill Area  2" top entry & 2" side ball valve
Available for Products    AcryShield, RenuWall, PVC Primer and ClearSeal

55-GALLON DRUM:

Container Type Steel drum
Container Volume   55 gallons
Dimensions (d x h) 24" x 35"
Fill Area  2" top entry
Available for Products    AcryShield, RenuWall, LiquiSeal, PVC Primer and ClearSeal

A 2” sting, approximately 4-foot long, is used to connect to the feeder line. The stinger should have male cam-lock fittings/connectors on both ends. The stinger hooks up to the pump and is set inside the drum.

5-GALLON PAIL:

Container Type Plastic Pail
Container Volume   5 gallons
Dimensions (d x h) 12" x 15"
Fill Area  12" top entry
Available for Products    AcryShield, RenuWall, LiquiSeal, PVC Primer, ClearSeal & RustShield

3.5-GALLON PAIL:

Container Type Plastic Pail
Container Volume   3.5 gallons
Dimensions (w x d x h) 12" x 12"
Fill Area  12" top entry
Available for Products    AcryFlex

If there are any further question regarding this procedure contact a National Coatings Representative at (800) 423-9557.