Product Data Sheet - RustShield A120 Low VOC

describe the image Download PDF Version

1. PRODUCT NAME

RustShield A120 Low VOC
Water Based Rust-Inhibitive Primer

2. MANUFACTURER

NATIONAL COATINGS CORPORATION

1201 Calle Suerte Camarillo, CA 93012

Phone: 800-423-9557
FAX: 800-294-3866
www.nationalcoatings.com

3. PRODUCT DESCRIPTION

RustShield A120 is water based primer to be used over ferrous metal surfaces and properly prepared rusted surfaces, to provide excellent resistance to flash rusting.

A120 is excellent for use over:

  • Metal Roof Decks
  • Metal Side Walls
  • Rail Cars
  • Pipes and Equipment
  • Tank Exteriors
  • Structural Steel
BENEFITS:
  • Single Component

  • Resistant to Flash Rusting

  • Outstanding Corrosion Protection

  • Low Odor

  • Low VOC

4. TECHNICAL DATA

See table below.

5. INSTALLATION

  • Apply by spray, brush, or roller.

  • Surface Preparation:

Abrasive blasting to SSPC-SP6 is normally recommended. However, power tool or hand tool cleaning in accordance with SSPC-SP3 or SSPC-SP2 is acceptable. Remove all dirt, oil, grease, rust scale and contaminants. New galvanized metal must be free of form oils and may require light sanding or etching.

  • Mix thoroughly before using. May

    be mixed with water up to 5%.

  • Apply at temperatures above 50ºF, and only when weather conditions will permit drying before rain, dew or freezing temperatures.

  • Cool temperatures and high humidity retard cure.

6. STORAGE

Store materials between 40ºF and 100ºF to prevent damage to products. Do not store at high temperatures or direct sunlight. Protect all materials from freezing during transit, handling, storage, and installation. Minimum one year shelf life if stored at 40°F-90°F.

7. AVAILABILITY AND COST

RustShield A120may be purchased directly from National Coatings. For information call 800-423-9557.

8. WARRANTY

Various warranties are available for A120 when used with specific AcryShield ® Restoration Systems installed by approved applicators.

9. MAINTENANCE

Periodic maintenance of AcryShield Restoration Systems containing A120 ensures extended performance and reduces life-cycle costs.

10. TECHNICAL SERVICES

Additional information, product brochures, and installation guide specifications are available.

11. FILING SERVICES

Additional product information is available from National Coatings Corporation.

TECHNICAL  DATA

Properties

Test Method

Average Value
A120

Color

 

Buff

Theoretical Coverage

 

192 sq. ft/gal.

Solids by Volume (%)

Calculated by formula

38% (+/-2%)

Weight per Gallon (lbs.)

 

11

Flash Point

Pensky-Martens Closed Cup

>200°F

Temperature Resistance

 

235°F

VOC

EPA Method 24

.8 lbs./gal.

Clean-up

 

water

Drying Time (hrs.) 75°F

 

2*

*Drying time is dependent on temperature & humidity

This product is for industrial/commercial applications only. These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.