Product Data Sheet - Industrial Cleaner
|Download PDF Version|
1. PRODUCT NAME
NATIONAL COATINGS CORPORATION
1201 Calle Suerte Camarillo, CA 93012
3. PRODUCT DESCRIPTION
Industrial Cleaner is a concentrated, non-corrosive, biodegradable, water-soluble cleaner used in the preparation of roof surfaces prior to coating application. Industrial Cleaner is U.S.D.A. and FDA approved, and meets all OSHA requirements.
4. TECHNICAL DATA
5. INSTRUCTION FOR USE
When cleaning roofs, dilute 10 parts water to 1 part cleaner. Apply liberally at the rate of 150 to 200 square feet per gallon. Allow the solution to stand for approximately 5 minutes before rinsing thoroughly. Do not allow to dry. Low areas and depressions in the roofing substrate containing excessive dirt or oils may require additional treatment(s). When cleaning walls or woodwork, use 2 oz per gallon.
Scrub or pressure-wash the entire surface, paying particular attention to low areas.
Before cleaner dries, pressure- wash the surface with clean water. Rinse thoroughly with clear water and repeat rinsing as required to remove all cleaning solution.
Repeat cleaning and rinsing procedures as required until a clean roof surface is obtained.
Allow the substrate to dry completely prior to application of any coating.
Store materials between 40ºF and 100ºF to prevent damage to products. Do not store at high temperatures or direct sunlight. Protect all materials from freezing during transit, handling, storage, and installation. Minimum one year shelf life if stored at 40°F-90°F.
7. AVAILABILITY AND COST
Industrial Cleaner may be purchased directly from National Coatings.
For information call 800-423-9557.
Ask a National Coatings Representative about available Warranties for Industrial Cleaner when used as an integral part of AcryShield® Roofing Systems installed by approved applicators.
Periodic maintenance of AcryShield Roofing System sensures extended performance and reduces life-cycle costs.
10. TECHNICAL SERVICES
Additional information, product brochures, and installation guide specifications are available.
11. FILING SERVICES
Additional product information is available from National Coatings Corporation.