National Coatings Blog

Direct Adhesion for Hard to Coat Single-Ply Roofing Membranes

Posted by Nicole Gale on Tue, Jun 09, 2015 @ 08:00 AM
A502SaveTimeandMoney

National Coatings has the unique ability to address the difficulties and failures that aged single-ply roofing experiences. Most roof coatings require caustic primers, acid etching agents, or high VOC solvents that need to be rinsed off and sometimes collected for disposal, adding additional cost to a roof life extension project. NCC's products have the unique ability to coat to single-ply roofing membranes without the need to use any of these harmful products. Our state of the art single-ply coating systems adhere directly to single-ply substrates providing a monolithic membrane without any of the seams that can be prone to failure. Coating restorations do no count as a new roof under most building codes, eliminating the need for periodic and costly tear-off's. This process allows for a truly sustainable roofing system by performing coating maintenance every 10 years.

AcryPly_Acrylic_Diagram_-_A502_eliminatedWhat's our secret? The AcryShield® A502 base coat! This single-ply base coat is the industry leader, ultra low VOC, high performance base coat for hard to coat surfaces such as Hypalon®, TPO, EPDM, and PVC roofing. A502 base coat eliminates the need for costly roof replacement and provides unique AcryLock technology to tenaciously adhere directly to EPDM, TPO and Hypalon without the need for additional primers or an etching rinse. A502 also provides an additional layer of waterproofing, superior adhesion, and resistance to ponded water.

FREE GUIDE: Single-Ply Roof Coating Systems


BENEFITS: APPROVALS:
  • Lower project cost and higher job efficiencies
  • Special work place safety requirements are reduced or eliminated
  • Safer work conditions
  • Elimination of need to capture caustic contaminated water as required by some municipalities
  • Prolonged Roof Life
  • Reduced Life Cycle Costs
  • Sustainable Roofing
  • Seamless Waterproofing
  • Fully-Adhered Installation
  • Acrylic Durability
  • ULTRA Low VOC

UL 790 Class A Rating   

describe the image

Factory Mutual Standard 4470 for Class 1 Fire, Windstorm, & Hail Classification

 describe the image

 ICC-ES ESR-2140

 describe the image

California State Fire Marshall

describe the image

ASTM D6083 Technical Data

ACRYSHIELD® A502

Property

Requirement

Typical Result

Color

 

Buff

Theoretical Coverage

 

66 sq. ft/gal

Wet Adhesion - Hypalon (pli)

2 Minimum

6.1

Wet Adhesion – TPO (pli)

2 Minimum

4.9

Wet Adhesion – EPDM (pli)

2 Minimum

2.5

Volume Solids (%)

> 50

54 ± 2

Weight Solids (%)

> 60

67.7 ± 2

Weight per gallon

 

11.88 lbs

Viscosity (KU)

85-141

110 ± 10

Drying Time (hrs)

 

4-8 hours*

*Drying time is dependent on temperature & humidity

ACRYSHIELD A502 is for industrial/commercial applications only.  These suggestions and data are based on information we believe to be reliable.  They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. Click here to view our full Product Data Sheet on AcryShiled A502 

Download our FREE Roof Coating Systems Benefits Brochure

Tags: Single-Ply Roof Coatings, Coating directly over TPO, Coating directly over EPDM, Coating Directly over Hypalon, TPO Roof Coating, TPO Roofing System, Singleply Roof Coating Systems

3 Ways to Determine if Your Single-Ply Roof Needs a Roof Restoration System

Posted by Nicole Gale on Tue, Jun 02, 2015 @ 08:30 AM

singleply-before-coatingIt is always best to be proactive in regards to fixing and restoring your commercial roof; however, this does not always happen because the roof is “out of sight, out of mind” making it easily the most skipped over element in properly maintaining a building.  The good news is more than likely it is not too late to restore or maintain your existing single-ply roof to new. Roof restoration systems extend the lifespan of your roof, lower roof maintenance costs and if maintained properly in the future, can avoid a costly and timely roof tear-off indefinitely.

Lets dive into the most common signs that your single-ply needs a roof restoration system.

Leaks
The most obvious of all - when water penetrates the inside of your building you need to do something quickly. Determining the location of the leak can sometimes be difficult but a professional roof inspector can help.

Download our FREE Roof Coating Systems Benefits BrochureDeterioration
Deterioration covers several different aspects. If you notice any of the issues in the list below, when inspecting your roof surface, contact us or call 800-423-9557 immediately so we can evaluate your roof and hopefully provide a roof restoration solution so you avoid a tear-off.

  • Blisters
  • Delamination
  • Deterioration
  • Holes
  • Mechanical Abuse Areas
  • Defects on the Roof Membrane

Learn More About Coating Over  Aged  Single-PliesFailing Joints and SeamsMake sure all the joints and seams are undamaged, watertight and intact. Make sure to double check joint locations at walls, equipment base flashings (HVAC equipment, skylights, etc…) and near pipe penetrations. Make sure all seams holding your single-ply roofing together are working effectively. Seams need to be able to be flexible to expand and contract with the roof’s fluctuations. Seam failure can be the number one cause for damage as water can easily penetrate these areas when they begin aging, chalking and losing their durability and flexibility.

If your single-ply roof is experiencing any of these failures, you will want to consider an AcryShield Roof Maintenance (ARM) System or an AcryPly Roof Restoration System, so you don't have to replace and tear-off your roof later - this will save you thousands of dollars. Download more information on our Roof Maintenance and Roof Restoration Systems, here

 

Tags: Roof Restoration, Single-Ply Roof Coatings, Coating directly over EPDM, Coating Directly over Hypalon, Restore TPO, roof restoration system

Roof Restoration Systems for Different Substrates

Posted by Nicole Gale on Thu, Apr 16, 2015 @ 08:00 AM

All Acrylic and Emulsion & Acrylic Systems

Need Help? Contact a Roofing  Professional  Zero ObligationAcryPly Roof Restoration Systems can be applied over BUR, Modified Bitumen, EPDM, PVC, TPO, Hypalon, Metal and Transite. The roofing systems contain polyester fabric that is embedded into the base coat, across the entire roof field. This provides the existing roof with an extremely durable, reinforcing layer. The AcryShield base coats used in these restoration systems provide waterproofing, superior adhesion, resistance to ponded water, bleed-through protection and resistance to plasticizer migration. The AcryShield top coats provide industry leading UV protection, longevity and brightness. They are formulated for superior dirt pick-up resistance and protection against biological attack, such as algae and mold. 

2 Different Systems:

  • The AcryPly All Acrylic System for roofing substrates that is smooth such as single-plies and metal.

AcryPlyAll-AcrylicDiagram

  • The AcryPly Emulsion and Acrylic System designed for asphalt, BUR, and Mod Bit roofing. This system uses LiquiSeal™ emulsion, which economically fills in any cracks and voids typically found in asphalt roofing. This provides additional waterproofing and an outstanding foundation upon which to build the balance of the membrane.

acryply_emulsion_-_acrylic_diagramDownload our FREE Benefits Brochure For Detailed Information On Our Systems & Coatings

Tags: BUR Roof Coating, Coating directly over EPDM, leak repair, roof repairs, Restoring TPO, Restore Metal Roof, Asphalt roof coating, re-roofing