High Performance Elastomeric Wall Coating Systems
Whether you have a newly constructed building or looking to restore your current buildings exterior walls, the RenuWall elastomeric wall coating systems provides superior weatherproofing, long-term durability, excellent adhesion, elongation and toughness.These systems deliver high-performance, acrylic, elastomeric coating for above-grade exterior walls. RenuWall provides outstanding resistance to weathering, temperature changes, ultraviolet radiation and mildew. It retains its bright color, long-term flexibility, and breathability for many years. RenuWall moves with the expansion and contraction cycles of a building to keep hairline cracks well sealed. As shrinkage cracks occur in new stucco, RenuWall bridges these openings to maintain a water tight and attractive surface.
BENEFITS:
- Superior Weatherproofing
- Outstanding Adhesion to:
- Masonry
- Stucco
- Block
- Poured Concrete
- Brick
- Exterior Grade Wood
- Long-Term Durability
- Excellent Resistance to Temperature Extremes and Dirt Pick-up
- Prolonged Wall Life
- Reduced Life Cycle Costs
- Safe and Easy Use
- Low VOC
RENUWALL® A300 |
||||
|
ASTM D6083/AIA 9830 Technical Data
|
||||
|
Properties
|
ASTM D6083 Method
|
AIA 9830 Method
|
Requirement
|
Result
|
|
Initial Tensile Strength (psi) |
ASTM D2370 |
|
200 Minimum |
> 325 |
|
Initial Elongation (%) |
ASTM D2370 |
|
100 Minimum |
> 250 |
|
Initial Elongation (%) |
|
ASTM D412, 77°F |
280 Minimum |
> 290 |
|
Initial Elongation (%) |
|
ASTM D412, 0°F |
50 Minimum |
> 40 |
|
Adhesion to Concrete, Dry (pli) |
ASTM C794, D903 |
|
No Reference |
> 6.0 |
|
Adhesion to Concrete, Wet (pli) |
ASTM C794, D903 |
|
2 Minimum |
> 1.0 |
|
Wind Driven Rain Resistance |
|
Fed Spec TT-C-555-B |
Pass |
Pass |
|
Tear Resistance (lbf / in) |
ASTM D624 |
|
> 60 |
> 100 |
|
Shore A Hardness |
|
ASTM D2240 |
No Reference |
> 75 |
|
5000 Hour |
ASTM D4798 |
|
No Chalk, |
No Chalk, Crack, Discolor |
|
Elongation After |
ASTM D2370 |
|
100 Minimum |
> 200 |
|
Low Temperature Flexibility |
|
ASTM C711 |
Pass 1/8” Mandrel |
Pass |
|
Low Temperature Flexibility After Accelerated Weathering |
ASTM D522 |
|
Pass 1/2” Mandrel |
Pass |
|
Permeance (perms) |
ASTM D1653 |
|
50 Maximum |
< 20 |
|
Water Swelling (%) |
ASTM D471 |
|
20 Maximum |
< 10 |
|
Fungi Resistance |
ASTM G21 |
|
Zero Rating |
Zero Rating |
|
Salt Spray, 500 Hours |
|
ASTM B-117 |
No Effect |
No Effect |
|
Volume Solids (%) |
ASTM D2697 |
|
> 50 |
53 ± 2 |
|
Weight Solids (%) |
ASTM D1644 |
|
> 60 |
67 ± 2 |
|
Viscosity (KU) |
ASTM D562 |
|
85-141 |
120 ± 10 |
|
B Value |
|
|
|
3.0 |
RenuWall A300 is for industrial/commercial applications only. These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.
