Product Data Sheet - AcrySeal A152 & A153
![]() |
Download PDF Version |
1. PRODUCT NAME
AcrySeal
Elastomeric Roof & Flashing Sealant
A152 Trowelable
A153 Brushable
2. MANUFACTURER
NATIONAL COATINGS CORPORATION
|
|
1201 Calle Suerte Camarillo, CA 93012 |
|
Phone: | 800-423-9557 |
FAX: | 800-294-3866 |
www.nationalcoatings.com
|
3. PRODUCT DESCRIPTION
AcrySeal is a premium blend of acrylic resins designed for exterior applications. This ultra-flexible material combines the waterproofing abilities of polyurethane with the flexibility and ease of use of acrylic polymers. AcrySeal provides an elastomeric, UV blocked, water-based sealant for use in a variety of exterior applications including roofing, HVAC, duct work, RV’s and mobile homes, as well as many other applications.
BENEFITS: |
|
4. TECHNICAL DATA
See table below.
5. INSTALLATION
- May be applied by brush, trowel, putty knife or caulking gun.
- All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
- Apply at temperatures above 55ºF.
- Apply only when weather conditions will permit drying before rain, dew or freezing temperatures.
- Cool temperatures and high humidity retard cure.
- For application details see specific Installation Guide Specifications.
6. STORAGE
Store materials between 40ºF and 100ºF to prevent damage to products. Do not store at high temperatures or direct sunlight. Protect all materials from freezing during transit, handling, storage, and installation. Minimum one-year shelf life if stored at 40°F-90°F.
7. AVAILABILITY AND COST
AcrySeal may be purchased from select distributors or directly from National Coatings Corporation. For more information, call 800-423-9557 or visit nationalcoatings.com/roof-coating-distributor-rep-locator
8. WARRANTY
Various warranties are available for specific AcryShield SPF Roofing Systems, AcryPly Roofing Systems and AcryShield Restoration Systems installed by approved applicators.
9. MAINTENANCE
Periodic maintenance of AcryShield SPF Roofing Systems, AcryPly Roofing Systems and AcryShield Restoration Systems ensures extended performance and reduces life cycle costs.
10. TECHNICAL SERVICES
Additional information, product brochures, and guide specifications are available. Roof energy evaluations, life cycle cost analyses, and other roof management services are available.
11. FILING SERVICES
Additional product information is available from National Coatings Corporation.
Typical Physical & Performance Characteristics:
Exceeds performance requirements of ASTM D1475, ASTM D2196, ASTM D2939 and TAS 139
Property |
Results |
Weight Per Gallon |
9.6 – 10.6 lbs./gal. |
Viscosity (pen) |
240 dmm |
pH |
7.0 – 7.5 |
Solids by Weight |
63% |
Tensile Strength |
300 – 350 psi |
Elongation (ASTM D562) |
425% |
Adhesion to Polyurethane Foam |
Excellent |
Combustible Solvents |
None |
Consistency |
Smooth Trowel |
Skin Time (50% Relative Humidity, 70º F) |
4 hours |
Full Cure (50% Relative Humidity, 70º F) |
36 hours |
Application Temperatures |
55º F - 100º F |
Clean-up Tools |
Soap and Water |
VOC |
<10 g/L (regulatory) |
*NOTE: Percentages listed are + or – 5%
*These products are for industrial/commercial applications only. Suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.