09980 Coatings for Concrete & Masonry |
 |
1. PRODUCT NAME
RENUWALL® A300
Elastomeric Wall Coating
2. MANUFACTURER
NATIONAL COATINGS CORPORATION |
1201 Calle Suerte Camarillo, CA 93012 |
| Phone: |
800-423-9557 |
| FAX: |
800-294-3866 |
www.nationalcoatings.com |
3. PRODUCT DESCRIPTION
RenuWall A300 is a high performance, acrylic, elastomeric coating for above grade exterior walls. It provides superior weatherproofing and long-term durability, with excellent adhesion, elongation and toughness.
RenuWall provides outstanding resistance to weathering, temperature changes, ultraviolet radiation and mildew. It retains its bright color, long-term flexibility, and breathability for many years.
RenuWall moves with the expansion and contraction cycles of a building to keep hairline cracks well sealed. As shrinkage cracks occur in new stucco, RenuWall bridges these openings to maintain a water tight and attractive surface.
RenuWall exceeds stringent ASTM D6083 and AIA 9830 performance requirements for elastomeric waterproofing coatings.
| BENEFITS: |
- Superior Weatherproofing
- Outstanding Adhesion to:
Masonry
Stucco
Block
Poured Concrete
Brick
Exterior Grade Wood
- Long-Term Durability
- Excellent Resistance to Temperature Extremes and Dirt Pick-up
- Prolonged Wall Life
- Reduced Life Cycle Costs
- Safe and Easy Use
- Environmentally Friendly
|
4. TECHNICAL DATA
See table on reverse side.
5. INSTALLATION
- May be applied by spray or heavy napped rollers.
- All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion. Further surface preparation is project specific. See Installation Guide Specifications or contact a National Coatings Technical Consultant.
- Apply minimum of two separate coats of 1 gallon per 100 square feet per coat.
- Apply at temperatures above 50ºF.
- Apply only when weather conditions will permit drying before rain, dew or freezing temperatures.
- Cool temperatures and high humidity retard drying and curing.
- For application details see specific Installation Guide Specifications.
6. AVAILABILITY AND COST
RenuWall A300 may be purchased directly from National Coatings.
For information call 800-423-557.
7. WARRANTY
Various warranties are available for RenuWall Weatherproofing Systems installed by approved applicators. Prior project approval is required.
8. MAINTENANCE
Periodic maintenance of RenuWall Weatherproofing Systems ensures extended performance and reduces life cycle costs.
9. TECHNICAL SERVICES
Additional information, product brochures and installation guide specifications are available. Customized application instructions are also available from a National Coatings Technical Consultant.
10. FILING SERVICES
Additional product information is available from National Coatings Corporation.
RENUWALL® A300
|
ASTM D6083/AIA 9830 Technical Data |
Properties |
ASTM D6083 Method |
AIA 9830 Method |
Requirement |
Result |
| Initial Tensile Strength (psi) |
ASTM D2370 |
|
200 Minimum |
> 325 |
Initial
Elongation (%) |
ASTM D2370 |
|
100 Minimum |
> 250 |
Initial
Elongation (%) |
|
ASTM D412, 77°F |
280 Minimum |
> 290 |
Initial
Elongation (%) |
|
ASTM D412, 0°F |
50 Minimum |
> 40 |
| Adhesion to Concrete, Dry (pli) |
ASTM C794, D903 |
|
No Reference |
> 6.0 |
| Adhesion to Concrete, Wet (pli) |
ASTM C794, D903 |
|
2 Minimum |
> 1.0 |
| Wind Driven Rain Resistance |
|
Fed Spec TT-C-555-B |
Pass |
Pass |
| Tear Resistance (lbf / in) |
ASTM D624 |
|
> 60 |
> 100 |
| Shore A Hardness |
|
ASTM D2240 |
No Reference |
> 75 |
|
5000 Hour
Accelerated Weathering |
ASTM D4798 |
|
No Chalk,
Crack, Discolor |
No Chalk, Crack, Discolor |
Elongation After
Accelerated Weathering (%) |
ASTM D2370 |
|
100 Minimum |
> 200 |
| Low Temperature Flexibility |
|
ASTM C711 |
Pass 1/8” Mandrel
@ -15°F |
Pass |
| Low Temperature Flexibility After Accelerated Weathering |
ASTM D522 |
|
Pass 1/2” Mandrel
@ -15°F |
Pass |
|
| Permeance (perms) |
ASTM D1653 |
|
50 Maximum |
< 20 |
| Water Swelling (%) |
ASTM D471 |
|
20 Maximum |
< 10 |
| Fungi Resistance |
ASTM G21 |
|
Zero Rating |
Zero Rating |
| Salt Spray, 500 Hours |
|
ASTM B-117 |
No Effect |
No Effect |
|
| Volume Solids (%) |
ASTM D2697 |
|
> 50 |
53 ± 1 |
| Weight Solids (%) |
ASTM D1644 |
|
> 60 |
67 ± 1 |
| Viscosity (KU) |
ASTM D562 |
|
85-141 |
120 ± 10 |
RenuWall A300 is for industrial/commercial applications only. These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.
|
