07560 Membrane Roofing/Asphalt Emulsion |
1. PRODUCT NAME
LiquiSeal™ A200
Asphalt Emulsion
2. SUPPLIER
NATIONAL COATINGS CORPORATION |
1201 Calle Suerte Camarillo, CA 93012 |
| Phone: |
800-423-9557 |
| FAX: |
800-294-3866 |
www.nationalcoatings.com |
3. PRODUCT DESCRIPTION
LiquiSeal A200 is a non-fibered, asphaltic bentonite clay emulsion containing no asbestos. A200provides excellent base coat waterproofing for AcryShieldÒelastomeric coating. A200is designed to provide resistance to the effects of weather. It resists cracking, checking, and most industrial pollutants. The dry films will not sag, flow, or re-emulsify under any weather conditions.
| BENEFITS: |
APPROVALS: |
- Seamless Waterproofing
- Safe and Easy to Use
- Solvent Free
- Environmentally Friendly
|
- UL 790 Class A Rating
- ICBO Evaluation Report #5007
- California State Fire Marshall
|
4. TECHNICAL DATA
See TABLE I below.
5. INSTALLATION
- Thoroughly power mix product prior to use.
- May be applied by spray, brush, roller or squeegee.
- All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
- Apply at temperatures above 50ºF.
- Apply only when weather conditions permit drying before rain, dew or freezing temperatures.
- Cool temperatures and high humidity retard cure.
- For special application details see Technical Bulletin: Application of AcryShield over Asphalt Emulsions.
6. AVAILABILITY AND COST
LiquiSeal A200 may be purchased directly from National Coatings Corporation. For information call
800-423-9557.
7. WARRANTY
Various warranties are available for specific AcryShield Restoration Systems and AcryPly® Roofing Systemsinstalled by approved applicators.
8. MAINTENANCE
Periodic maintenance of AcryShield Restoration Systems and AcryPly Roofing Systemsensures extended performance and reduces life cycle costs.
9. TECHNICAL SERVICES
Additional information, product brochures, and installation guide specifications are available. Energy Evaluations, Life Cycle Cost Analyses, and other roof management services are also available from our technical consultants.
10. FILING SERVICES
Additional product information is available from National Coatings Corporation.
TABLE I TECHNICAL DATA |
Properties |
Average Value |
| Solids by Volume (%) |
45-55 |
| Pounds per Gallon |
8.5 lbs. |
| Flexibility(@32°F) |
No Cracking |
| Heat Resistance (@212°F) |
No Sag or Blistering |
| Permeability |
Dependent upon Film Thickness |
| Clean-up |
Water |
| Drying Time (hrs.) |
Normally 12 hrs.* |
| Meets or Exceeds |
ASTM D1227-95 Type III
Fed. Spec. SS-R-1781 Type 1
Mil. Spec. MIL-R-3472A
|
*Dependent on temperature & humidity
These products are for industrial/commercial applications only. Suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.
|
