Search


   
username
password
» Signup
» Forgot Password
 

MANUFACTURER'S NAME:

NATIONAL COATINGS CORPORATION
1201 CALLE SUERTE
CAMARILLO, CA 93012
www.nationalcoatings.com

EMERGENCY TELEPHONE:

800-423-9557

DATE OF LAST REVISION:

07/15/99


Download PDF Version

SECTION I - PRODUCT IDENTIFICATION

PRODUCT NUMBER:

A300

PRODUCT NAME:

RenuWall®

PRODUCT CLASS:

Acrylic Wall Coating

SECTION II - HAZARDOUS INGREDIENTS

None known at hazardous level.

SECTION  III - PHYSICAL/CHEMICAL CHARACTERISTICS

APPEARANCE: Milky white liquid EVAPORATION RATE: Less than 1
BOILING POINT: 212ºF WEIGHT PER GALLON: 11.6 lbs.
VAPOR DENSITY: Less than 1 % VOLATILE BY VOLUME: 48 maximum
VAPOR PRESSURE: Greater than 1    

SECTION  IV - REACTIVITY DATA

STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur
HAZARDOUS DECOMPOSITION PRODUCTS:

Acrylic monomers

CONDITIONS TO AVOID: Keep from freezing
INCOMPATIBILITY: None reasonably foreseeable

SECTION  V - FIRE & EXPLOSION HAZARD DATA

FLAMABILITY CLASSIFICATION:

Not DOT Regulated Flash Point - Non combustible
LEL - N/A

EXTINGUISHING MEDIA: N/A
UNUSUAL FIRE & EXPLOSIONS HAZARD:

None

SPECIAL FIREFIGHTING PROCEDURES:

For fires involving this material, do not enter any enclosed or confined space without proper protective gear, including self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency.

SECTION  VI - SAFE HANDLING & USE INFORMATION

RESPIRATORY PROTECTION:

Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded.

VENTILATION:

Mechanical local exhaust ventilation at point of containment release.

PROTECTIVE GLOVES:

Impervious

EYE PROTECTION:

Chemical splash goggles (ANSI Z-87.1 or approved equivalent)

SECTION  VII - HEALTH HAZARD DATA

EFFECTS OF OVER EXPOSURE:
  • INHALATION: Vapor or mist can cause irritation of the nose, throat and lungs.
  • EYE EXPOSURE: Possibly slightly irritating to eyes with direct contact.
  • SKIN EXPOSURE: Possible skin irritant with repeated or prolonged contact.
EMERGENCY & FIRST AID PROCEDURES
  • INHALATION: Move subject to fresh air.
  • EYE & SKIN CONTACT: Flush eyes with large amounts of water for at least 15 minutes. See a physician if irritation persists. Wash affected skin areas with soap and water.
  • INGESTION: If swallowed give two glasses of water to drink.  See a physician.

SECTION  VIII - SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Keep spectators away.  Floor may be slippery, use care to avoid falling.  Scoop or shovel solid material into a suitable container for recovery or disposal.  Keep spills out of municipal sewers and open bodies of water.
WASTE DISPOSAL METHODS:

Disposal should be in accordance with Federal, state, and local regulations.

SECTION  IX - SPECIAL PRECAUTIONS

PRECAUTIONS TO BE TAKEN IN HANDLING & STORAGE: Keep from freezing.
OTHER PRECAUTIONS: None

Download PDF Version
 
Home : About Us : Press Releases : Affiliates & Memberships : Our Clients
Contact Us : Tech Support Center : Site Map : Terms of Use and Privacy Policy

Copyright 2009 © National Coatings Corporation. All rights reserved.

RCI Incorporated CSI Net