1. PRODUCT NAME
LiquiSeal™ A201
Asphalt Emulsion
2. SUPPLIER
|
NATIONAL COATINGS CORPORATION
|
|
1201 Calle Suerte Camarillo, CA 93012
|
| Phone: |
800-423-9557 |
| FAX: |
800-294-3866 |
|
www.nationalcoatings.com
|
3. PRODUCT DESCRIPTION
LiquiSeal A201 is an asphaltic bentonite clay emulsion modified with acrylic rubber to achieve a permanently elastomeric waterproofing compound. When cured, A201 resists checking and cracking. The dry film remains flexible and will not sag, flow or re-emulsify. Special unblown soft asphalts help improve the weathering characteristics of A201, as well as enhance resistance to industrial pollutants, contaminants and corrosives. Premium acrylic rubbers increase the elongation of A201, and also give it great adhesion and low temperature flexibility. A201 provides excellent base coat waterproofing for AcryShield elastomeric coating.
| BENEFITS: |
APPROVALS: |
-
Seamless Waterproofing
-
Safe and Easy to Use
-
Solvent Free
|
UL 790 Class A Rating
ICC-ES Evaluation Report #5007
California State Fire Marshall
 |
4. TECHNICAL DATA
See Table below
5. INSTALLATION
-
Thoroughly power mix product prior to use.
-
May be applied by spray, brush, roller or squeegee.
-
All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
-
Apply at temperatures above 50ºF.
-
Apply only when weather conditions will permit drying before rain, dew or freezing temperatures.
-
Cool temperatures and high humidity retard cure.
-
For special application details see Technical Bulletin: Application of AcryShield over Asphalt Emulsions.
6. AVAILABILITY AND COST
LiquiSeal A201 may be purchased directly from National Coatings. For information call 800-423-9557.
7. WARRANTY
Various warranties are available for specific AcryShield Restoration Systems and AcryPly® Roofing Systemsinstalled by approved applicators.
8. MAINTENANCE
Periodic maintenance of AcryShield Restoration Systems and AcryPly Roofing Systemsensures extended performance and reduces life cycle costs.
9. TECHNICAL SERVICES
Additional information, product brochures, and installation guide specifications are available. Energy Evaluations, Life Cycle Cost Analyses, and other roof management services are also available from our technical consultants.
10. FILING SERVICES
Additional product information is available from National Coatings Corporation.
TECHNICAL DATA
|
Properties
|
Average Value
|
|
Solids by Volume (%)
|
45% - 55%
|
|
Pounds per Gallon
|
8.5 lbs.
|
|
Flexibility(@32oF)
|
No Cracking
|
|
Heat Resistance (@212oF)
|
No Sag or Blistering
|
|
Permeability
|
Dependent upon Film Thickness
|
|
Clean-up
|
Water
|
|
Drying Time (hrs.)
|
Normally 12 hrs.*
|
*Dependent on temperature & humidity
These products are for industrial/commercial applications only. Suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.